MEASUREMENT CERTIFICATE - 2nd edition

X-99 - ISAF RECOGNIZED CLASS Feb 2000

 

YARD´S DECLARATION:

This X-99 did comply with the X-99 International Class Rules - 1998 Edition while leaving the yard in respect of following subparagraphs:

3.1 - 3.2 - 3.5 - 3.6 - 3.8 - 4.1 - 4.2 - 4.3 - 4.4 - 4.5 - 5.1 - 5.2 - 5.3 - 5.5 - 6.1 - 6.2 - 6.3 - 6.4 - 6.5 - 6.6 - 7.1 - 7.2 - 7.3 - 7.4 - 8.1 - 9.1 - 9.2 - 9.4 - 9.5 - 9.6 - 10.1 - 15 15.1 - 15.2 - 15.3 - 15.4 - 15.5 - 15.6 - 16.1 - 16.2 - 17.1 - 17.2 - 17.3 - 17.5 - 17.6

 

Date          :____________         Yard´s representative:___________________________

 

 

X-99 HULL NO                                                                                           YEAR OF DEPARTURE FROM YARD:

 

REGISTERED KEEL CASTING WEIGHT: (boats built after 1998)

 

ENGINE MAKE, MODEL                                                                             ENGINE DRY WEIGHT

 

 

 

OWNER´S DECLARATION:

I undertake to race this X-99 only as long as I maintain it strictly in accordance with the valid class rules

 

Date :____________                                             Owner´s signature:___________________________

 

 

 

YACHT´S NAME:                                                                                       YACHT CLUB:

 

YACHT´S FIRST SAIL NO:                                                                           YACHT´S CURRENT SAIL NO:

 

OWNER´S NAME:                                                                                      STREET/NO

 

ZIPCODE:                           TOWN:                                                            COUNTRY:                                ELEC. ADDRESS/TEL

 

e-mail address.

 

APPOINTED MEASURER´S  NAME, ADDRESS , TEL - STAMP.               REGISTERED BY NATIONAL SAILING

                                                                                                                             FEDERATION

_________________________________

_________________________________

_________________________________

_________________________________

_________________________________

 

(To be appointed by the National. X-99 Club or the National Sailing Federation)

MEASURER´S DECLARATION:

I have checked or measured according to following forms, enclosed this cover page:

(Form A is mandatory, Forms B & C are advsory)

 

A)                              X-99 Measurement Form for Weights                            (dated March 1997)

B)                               X-99 Measurement Form for Mast & Rig                       (dated February 2000)

C)                               X-99 Measurement Form for Sails                                 (dated February 2000)

 

Date:______________                Measurer´s signature:_________________________________

 

 


(backside of Measurement Certificate)

 

Change of  Ownership

 

New Owner´s Name:________________________________________________________

 

New Owner´s Address:______________________________________________________

 

_________________________________________________________________________

 

_________________________________________________________________________

 

 

NEW OWNER´S DECLARATION:

I undertake to race this X-99 only as long as I maintain it strictly in accordance with the valid class rules

 

Date :____________                                             Owner´s signature:___________________________

 

 

 

 

 

New Owner´s Name:________________________________________________________

 

New Owner´s Address:______________________________________________________

 

_________________________________________________________________________

 

_________________________________________________________________________

 

 

 

NEW  OWNER´S DECLARATION:

I undertake to race this X-99 only as long as I maintain it strictly in accordance with the valid class rules

 

Date :____________                                             Owner´s signature:___________________________

 

 

 

 

New Owner´s Name:________________________________________________________

 

New Owner´s Address:______________________________________________________

 

_________________________________________________________________________

 

_________________________________________________________________________

 

 

NEW OWNER´S DECLARATION:

I undertake to race this X-99 only as long as I maintain it strictly in accordance with the valid class rules

 

Date :____________                                             Owner´s signature:___________________________

 

 

 

 


A)  X-99 Measurement Form for Weights

Measform00.gif (21203 bytes)

 

 

 

 

 

 

 

 


B) X-99 ISAF RECOGNIZED CLASS - MEASUREMENT FORM FOR MAST & RIG - Feb 2000

This measurement form is not mandatory to be filled and shall only be filled out when control measurement has been carried out.

 

MAST & RIG                                                                                                           Covered by Yards declaration

 

 

Rule no

 

What to be measured

 

INITIALS

 

MAX

(mm)

 

MIN

(mm)

 

Notes

 

Actual mea­surement

 

 

 

6.2

 

Distance  mast section  to forstay at deck level

 

J

 

3450

 

3435

 

 

 

 

 

 

 

 

 

Mast profile length

 

MPL

 

140

 

136

 

 

 

 

 

 

 

 

 

Mast profile width

 

MPW

 

94

 

90

 

 

 

 

 

 

 

 

 

Taper length

 

TL

 

2100

 

 

 

 

 

 

 

 

 

 

 

Taper top profile length

 

TPL

 

 

 

80

 

 

 

 

 

 

 

 

 

Taper top profile width

 

 

 

 

 

60

 

 

 

 

 

 

 

6.3

 

Dist between the black bands

 

P

 

12500

 

 

 

 

 

 

 

 

 

6.4

 

Boom above sheerline

 

BAS

 

1600

 

1580

 

 

 

 

 

 

 

 

 

Boom above base mast

 

BABM

 

2790

 

2770

 

 

 

 

 

 

 

9.2

 

Forestay height above lower P-band

 

IG above lower P band

 

9665

 

9625

 

 See rigplan drawing no 3

 

 

 

 

 

6.5

 

Spinn halyard height related to forestay height

 

ISP<=IG

 

 

 

 

 

 See rigplan drawing no 3

 

 

 

 

 

6.6

 

Top spreader length

 

TSL

 

530

 

510

 

 6290 +/- 300 mm above lower P-band

 

 

 

 

 

 

 

Lower spreader length

 

LSL

 

860

 

840

 

 2540 +/- 300 mm above lower P-band

 

 

 

BOOM                                                                                                                   Covered by Yards declaration

 

 

 

7.1

 

Boom depth

 

BD

 

140

 

 

 

 

 

 

 

 

 

7.2

 

Boom length

 

E

 

4500

 

 

 

 Black band distance to aft side mast profile

 

 

 

SPINNAKER POLE                                                                 Covered by Yards declaration

 

 

 

8.1

 

Spinn pole length

 

SPL

 

3450

 

 

 

 

 

 

 

STANDING RIGGING                                                                              Covered by Yards declaration

 

 

 

9.4

 

Forestay diameter

 

 

 

6

 

5 - see note

 

 5 mm Dalform or Dyeform may be fitted

 

 

 

 

 

 

 

Running backstay - diameter

 

 

 

5

 

5

 

 

 

 

 

 

 

 

 

Permanent backstay - diameter

 

 

 

4

 

4

 

 

 

 

 

 

 

 

 

Cap shrouds - diameter

 

 

 

6

 

6

 

 

 

 

 

 

 

 

 

Intermediate shrouds - diameter

 

 

 

4

 

4

 

 

 

 

 

 

 

 

 

Lower shrouds - diameter

 

 

 

6

 

6

 

 

 

 

 

 

 

 

 

Checkstays - diameter

 

 

 

4

 

4

 

 

 

 

DATE:                MEASURERS NAME AND SIGNATURE                                   

 

 

 

 

 

X-99 - ISAF RECOGNIZED CLASS - MEASUREMENT FORM FOR SAILS -

Feb 2000

 

MAINSAIL                                     (Min cloth weight 260 m2)

 

 

 

Rule-no

 

WHAT TO MEASURE

 

INITIALS

 

MAX

(mm)

 

MIN

(mm

g/m2)

 

NOTES

 

 

ACTUAL MEASUREMENT

 

 

 

11.6

 

Headboard

 

HB

 

160

 

 

 

 

 

 

 

 

 

11.9

 

Leech length

 

 

 

13200

 

 

 

 

 

 

 

 

 

11.10

 

Upper girth

 

MGU

 

1650

 

 

See Rule

 

 

 

 

 

11.10

 

Middle girth

 

MGM

 

2800

 

 

See Rule

 

 

 

 

 

11.11

 

Top batten

 

BL1

 

1500

 

 

 

All battens evenly distrib­uted over the length of the leech

 

 

 

 

 

11.11

 

Upper Middle batten

 

BL2

 

1500

 

 

 

All battens max width 52 mm

 

 

 

 

 

11.11

 

Lower Middle batten

 

BL3

 

1500

 

 

 

 

 

 

 

 

 

 

11.11

 

Lower batten

 

BL4

 

1100

 

 

 

 

 

 

 

 

 

11.12

 

Reef 1  Leech

 

 

 

 

 

1000

 

See Rule for closer defini­tion

 

 

 

 

 

11.12

 

Reef 2  leech

 

 

 

 

 

3200

 

 

 

 

 

 

 

11.15

 

Window

 

 

 

 

 

 

 

Max size 0.32 m2 - not within 200 mm of leech

 

 

 

GENOA 1                                                                    (Min cloth weight 140 g/m2)

 

 

 

11.16

 

Foot length

 

 

 

no limit

 

no limit

 

To be recorded for checking girth lengths

 

 

 

 

 

11.16

 

Top girth

 

 

 

Foot x 0.25

 

 

 

Girth length of genoa at 3/4 height of both luff and leech

 

 

 

 

 

11.16

 

Middle girth

 

 

 

Foot x 0.5

 

 

 

Girth length of genoa at _ height of both luff and leech

 

 

 

 

 

11.16

 

Lower girth

 

 

 

Foot x 0.75

 

 

 

Girth length of genoa at 1/4 height of both luff and leech

 

 

 

 

 

11.17

 

Luff length

 

Tmax

 

11500

 

 

 

 

 

 

 

 

 

11.16

 

Luff Perpendicular

 

LP

 

5170

 

 

 

If forestay profile is used, max LP shall be reduced by the double value of the width of the profile -see rule 11.16

 

 

 

GENOA III                                                                                        (Min cloth weight 310 g/m2)

 

 

 

11.16

 

Foot length

 

 

 

No limit

 

no limit

 

To be recorded  for checking girth lengths

 

 

 

 

 

11.16

 

Top girth

 

 

 

Foot x 0.25

 

 

 

Girth length of genoa at 3/4 height of both luff and leech

 

 

 

 

 

11.16

 

Middle girth

 

 

 

Foot x 0.5

 

 

 

Girth length of genoa at _ height of both luff and leech

 

 

 

 

 

11.16

 

Lower girth

 

 

 

Foot x 0.75

 

 

 

Girth length of genoa at 1/4 height of both luff and leech

 

 

 

 

 

11.18

 

Luff perpendicular

 

LP

 

3350

 

 

 

Battens allowed - top bat­ten full length Lower 2 battens max 500 mm

 

 

 

 

11.19

 

Luff length

 

Tmax

 

11500

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX SPINNAKER

 

 

11.21

11.22

 

Leech length

 

SL

 

11200

 

 

 

Min cloth weight 40 g/m2

 

 

 

 

 

 

 

Foot length

 

SF

 

6350

 

 

 

 

 

 

 

 

 

 

 

Max width

 

SMW

 

8400

 

 

 

 

 

 

 

REACHING SPINNAKER

 

 

 

11.21 11.23

 

Leech length

 

SL

 

11200

 

 

 

min cloth weight 40 g/m2

 

 

 

 

 

 

 

Foot length

 

 

 

6200

 

5900

 

 

 

 

 

 

 

 

 

Width at 1/2 height

 

 

 

6200

 

5900

 

 

 

 

 

DATE:                               MEASURER´S NAME AND SIGNATURE